If you have done some tests, you can see the values in the menu STATISTICS located under the first 3 lines. If you have defined blocks, the values are separated per block and identified with a block number.
Mes/Samp 3
Oper. 01
Unit N.

STATS MXI
Samp 002
Mea +4.19
StDev +0.39
S/M +0.09

001 +4.760
001 +3.865
001 +3.947
002 +4.048

Here, each block consists of 3 values. One block has been measured. Only one test of the second block is done. In the measured values are too many for the display, move the display by means of the down and up arrow keys..
You can display the values any time after a test is complete. However the instrument can’t memorize more than 100 values.